RepRap: Blog

Looks sweet O_O I can't wait to see these in action!
 

A few of us have been working on this on thingiverse here: http://www.thingiverse.com/tag:Mini-Mendel

I'm glad it has its own name now, I think it will encourage others to contribute.
 

Cool!
Looks like a Mendel & BfB Rapman baby! Twin BfB extruders and electronics are probably Erik's personal additions.
 

He got rid of the dual hot ends when he he was able to use the original x-carriage because he printed my pulley extenders. It looks like this now: http://www.thingiverse.com/image:20047
 

I had the BitsFromBytes electronics, but given their lack of new open source releases (they are conflicting with their own licence right now) it's hard to get multi-material working. So essentially reverse engineering is more trouble that starting with entirely new hardware. I replaced everything with my own electronics now. Works much better that way.
 

This comment has been removed by the author.
 

Thanks Erik and whosawhatsis? I've stolen your picture and put it on the wiki page.
 

BTW, there's a picture of my oversized Huxley here:http://www.thingiverse.com/derivative:3053

I cut the rods and belts longer to make it almost as big as Mendel. The build platform is 8"x8" (about 195x195mm usable), but the outside is only 15"x14"x13". I've had a lot of trouble getting reliable extrusion, and I've taken the bowden cable out of the equation (at least temporarily) and have been working with carriage-mounted extruders. This seems to work fine with the NEMA 14 motors I bought, which meet the 13.7 N-cm torque requirement for Mendel.
 

The picture is an old one, before the pulley extenders and the other modifications I made to get it working. I'll post a new one when I get the extruder put back together with the new motor I ordered.