Wednesday, April 29, 2009
DIY chip fab
This blog is for RepRap progress, but sometimes things happen elsewhere that deserve a mention too.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhD_i8dT6AGhvWHm63i6xboZm_kfugf-SQg_JL-etgG1-5IbIO_w6uc7gTHtX8MJbEtTGVjXgjjvwJRY-Oc8rPIvIbB2gJXxxUtWhTupLylDN2f_LTx19w4GHj4nPJx9ibY97yQKw/s320/inverter-fab.jpg)
So, thanks to Julian Skidmore for telling us about Jeri Ellsworth, who is doing amazing stuff...
Check out these two links to her work:
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhD_i8dT6AGhvWHm63i6xboZm_kfugf-SQg_JL-etgG1-5IbIO_w6uc7gTHtX8MJbEtTGVjXgjjvwJRY-Oc8rPIvIbB2gJXxxUtWhTupLylDN2f_LTx19w4GHj4nPJx9ibY97yQKw/s320/inverter-fab.jpg)
So, thanks to Julian Skidmore for telling us about Jeri Ellsworth, who is doing amazing stuff...
Check out these two links to her work:
http://www.flickr.com/photos/jeriellsworth/2835524263
and
http://www.flickr.com/photos/jeriellsworth/2835459827
Comments:
<< Home
Fascinating.
Doing a similar fabrication effort on the RepRap would be somewhat like dip pen lithography.
Also, anyone with a nice temperature-and-atmosphere controled furnace like that could also sinter fused-deposition bronze parts, using metal-filled polymer similar to the stuff designed for metal injection molding.
Post a Comment
Doing a similar fabrication effort on the RepRap would be somewhat like dip pen lithography.
Also, anyone with a nice temperature-and-atmosphere controled furnace like that could also sinter fused-deposition bronze parts, using metal-filled polymer similar to the stuff designed for metal injection molding.
<< Home