Thursday, March 25, 2010
Let's Go To The Faire!
RepRap is going to the
2010 Bay Area Maker Faire
May 22nd and 23rd, 2010,
San Mateo County Event Center, California.
RepRap being:
1) Folk showing off their machines!
1a) You!
2) Folk selling machines, parts, kits, sundry subsystems, supplies like
plastic filament, electronics, steppers and so on.
2a) You!
3) Folk who are still building machines!
3a) You!
So if you've like to come out and help table, or if you're planning on
selling stuff, or if you think you'll come by and say hi! then
Swing by and introduce yourself in this forum thread!
We're hoping for lots of people. (How many RepRappers are out there, anyway?)
Labels: Maker Faire, San Francisco, World Domination
Tuesday, March 16, 2010
RepRap in Singapore! (New RepRap User Group)
Singapore RepRap User Group
From: Soon Wei
To:
SebastienBailard
Date: 03/15/2010 06:53AM
Hi Sebastien,
I am Soon Wei from Singapore. Happen to see some of your messages. I just meet Xiang Hui few hours back. I would like to start a Singapore RepRap user group and start to build the First Singapore RepRap. (If we are?) FYI, I am an Elec Electronic Enginer and I've used a few Atmel MCU b4 so that is not a big issue. I should be able to source for the raw mech material except the RP connectors... I have access to a small lathe, but i forsee the 0.5mm on the barrier making is a challenge. Aha too excited and forgotten my goal. Would it be possible to start a RUS for Singapore? Thanks in advance.
-Soon Wei
No problem. Good luck and happy RepRapping!
Singapore RUG Home Page
Singapore RepRap User Group Forum/Mailing List
-Sebastien
p.s. to rest of the RepRap-using world:
We have 150+ or so other RepRap User Groups
So if you want to make a RepRap, do check them out.
To:
SebastienBailard
Date: 03/15/2010 06:53AM
Hi Sebastien,
I am Soon Wei from Singapore. Happen to see some of your messages. I just meet Xiang Hui few hours back. I would like to start a Singapore RepRap user group and start to build the First Singapore RepRap. (If we are?) FYI, I am an Elec Electronic Enginer and I've used a few Atmel MCU b4 so that is not a big issue. I should be able to source for the raw mech material except the RP connectors... I have access to a small lathe, but i forsee the 0.5mm on the barrier making is a challenge. Aha too excited and forgotten my goal. Would it be possible to start a RUS for Singapore? Thanks in advance.
-Soon Wei
No problem. Good luck and happy RepRapping!
Singapore RUG Home Page
Singapore RepRap User Group Forum/Mailing List
-Sebastien
p.s. to rest of the RepRap-using world:
We have 150+ or so other RepRap User Groups
So if you want to make a RepRap, do check them out.
Labels: RUG, Singapore, World Domination
